PE Series
THERMAL SET POLYESTER
INKS FOR METAL
STANDARD COLORS
Halftone Clear*
Topcoat*
White*
Black*
Primrose Yellow LF*
Lemon Yellow LF*
Medium Yellow LF*
Orange LF*
Fire Red LF*
Flag Red LF*
Deep Red LF*
Magenta*
Light Blue*
Perma Blue*
Navy Blue*
Ultra Blue*
Emerald Green*
Perma Green*
Iron Oxide Yellow*
Iron Oxide Red*
Iron Oxide Black*
PE-801
PE-802
PE-803
PE-804
PE-805LF
PE-806LF
PE-808
PE-810
PE-812
PE-813
PE-815-LF
PE-816
PE-817
PE-818
PE-819
PE-820
PE-821
PE-822
PE-823
PE-824
PE-835
TRANSPARENT COLORS
Transparent Yellow*
Transparent Orange*
Transparent Red B*
Transparent Magenta*
Transparent Violet*
Transparent Blue*
Transparent Green*
Transparent Red Y*
PE-831
PE-832
PE 833
PE-834
PE-835
PE-836
PE-837
PE-838
METALLICS
Pale Gold*
Rich Gold*
Silver*
Bright Silver*
Rich Pale Gold*
PE-826
PE-827
PE 828
PE-829
PE-851
* Heavy metal compliant
Excels for Exterior Use On Metals
​
For exterior use. PE Series offers excellent adhesion and flexibility for metal applications. This high gloss formulation is also recommended for general OEM use, nameplates, automotive and equipment panels. Superior flexibility and chemical resistance. Complies with 0T 180° bend performance standard.
May be reduced for direct or reverse roller coating, coil coating and spraying.
SUBSTRATES
Metals | Anodized, mill-finished and coated aluminum​
​
Compliant with Title 2l CFR I 75.300
(incidental food contact.)
​
SPECIAL PRIMERS & TOPCOATS
PE-802 Topcoat: For use over colors or as a mixing clear.
​​
MODIFIERS
Screening Thinner: PE-847
Flow Additive: Use 0.25 to 1.0% PE-845
Catalyst: PE-850
Screen Wash: Use PE-849
SCREEN MESH
260 to 355 Monofilament
STENCILS
Direct method
emulsions,
capillary films
SQUEEGEE
All types, 60 to 80 durometer
Complies with Title 21 CFR 175.300 | Incidental Food Contact
PE Inks Will Not Cure By Air Drying
COVERAGE
Approximately 1200 - 1500 Sq, Ft / Gal.
Note: lnformation contained in Cudner & O’Connor product sheets is based on laboratory and field tests. Because we cannot control actual production conditions, no warranty is expressed or implied. Careful testing is always recommended prior to production. Consult with our Technical Services Department on all application issues.
​BAKE/CURE
Bake Dry:
300°F for 15 minutes
350°F for 8 minutes
400°F for 4 minutes
Flash-off 30 seconds at 500°F.
​
Equipment: Batch oven with convection air or industrial conveyor dryer (non-textile) are preferred. lR panels may provide sufficient cure if belt will accommodate parameters above.